Features
Each end of the corner is angled by 22.5°, so the 45° are shared between both joints and the Straight Sections on either side meet it at the same angle. In the line, both versions take up the 1.00 m grid, as part of the Mojo stage barrier range.
On a positive corner the line turns away from the crowd, usually towards the stage; its mark is green. On a negative corner it turns towards the crowd, usually away from the stage, and the mark is blue. Both colours sit on the braces, so the crew can easily tell the corners apart on site.
The positive corner has a single brace and no rear step. The negative corner has two braces that support the upright, with a perforated rear step between them. In front of the upright, both floor plates are closed: on the positive corner it ends in a ramp towards the crowd, on the negative corner in a point.
Several corners can be combined in one line, also with the Fixed Corner 22.5°; together they create a wide, smooth curve. A 45° step is ideal at locations where the line has to change direction sharply, for example at the corners of catwalks, thrusts and other stage structures. The Straight Section barriers between the corners set how tight the turn is.
In numbers
Most dimensions match the Straight Section; two set the 45° corner apart.
Crowd side
0.72m
The floor plate in front of the upright is as deep as at the Straight Sections next to it.
Side edge
1.25m
Where the corner meets a Straight Section, both are equally deep.
Rear step
0.35m
Only the negative corner has a step, slightly higher than along the rest of the line.
Folded
0.11 – 0.12m
For transport, the corner folds flat to 0.11–0.12 m, at a length of 1.24–1.25 m.
Technical data
| Feature | Fixed Corner 45° |
|---|---|
| Angle | +45° positive, −45° negative |
| Height | 1.20 m |
| Depth | 1.19 m positive, 1.15 m negative (1.25 m at the side edge) |
| Floor plate width front / back | positive 1.03 m / pointed, negative pointed / 1.00 m |
| Upright width | 0.48 m positive, 0.63 m negative |
| Floor plate in front of upright (side edge) | 0.72 m |
| Depth behind upright (side edge) | 0.51 m |
| Braces | 1 positive, 2 negative |
| Step height | no step positive, 0.35 m negative |
| Weight | 28 kg |
| Material | aluminium; stainless steel braces, black-coated on the black version |
| Finish | silver, or black upright and braces |
| Connection | one bolt and two pins |
| Tested load | 7.46 kN/m positive, 5.56 kN/m negative (Lloyd's 2011), 5 kN/m (TÜV 2013) |
Details can vary slightly between production series.
System
Straights
The basic element the corner connects to, on a 1.00 m grid. The G1 and G3 also come as a 0.50 m element for shorter runs.
Corners
Half the angle in one fixed step, for gentler turns. In combination with the 45° corner, the line can follow a stage front in finer steps.
Corners
Hinged corners whose angle is set on site, for turns the fixed steps do not cover. The Flex bends the line from −90° to +90°.
Certification
Lloyd's British Testing tested a positive and a negative specimen in 2011 to BS EN 13200-3:2005, report 030611-SB01, sheets 8 and 9, and TÜV Nederland certificate 2013-A-168-C1 names both versions. Each document applies only to the specimens tested.
All documents are on the certification page.
Downloads
FAQ
Two contacts, depending on the question:
A 45 degree corner barrier is a barrier section with a fixed angle of 45°. In a Mojo Barrier line, the Fixed Corner 45° is a full module with its own floor plate, so the crowd stands on it just as on the Straight Sections on either side. One of the benefits of a fixed angle: the new direction is reached in a single module, with nothing to adjust on site.
| Fixed Corner 45° | Fixed Corner 22.5° | |
|---|---|---|
| Angle | 45° | 22.5° |
| Colour code | green / blue | pink / white |
| Braces | 1 positive, 2 negative | double braces on both |
| Rear step | negative only | both versions |
Yes. The Fixed Corners of the G1 and G2 come in silver and in black, always on a silver floor plate. Details can differ between production series, for example the rear step height on the negative corner. Which finish is available, and suitable for the rest of the line, depends on what the rental company has in stock.
The Fixed Corner 45° is hired out through the rental companies of the MOJO Holding Group, in silver or in black. The rental company in your country can confirm availability. For questions about the product, its data sheets and test documents, contact our team.
Hire
Tell the rental company in your country where the line needs a sharp turn. They review the layout and plan the 45° corners, positive and negative, together with the rest of the line.
