Where to rent
3DDrag to rotate · pinch or scroll to zoom
Loading 3D model … 0 %

Key features

A crowd barrier gate for crew and cables

3D view: Snake Runner with the door open
01 / 04 · Runner

A narrow door for cable runs

The Snake Runner is a hinged section with a narrow door for cable runs. Crew feed multi-cores and power cables through it while the line goes up, once it stands and while it comes down.

3D view: Snake Gate with the door open
02 / 04 · Gate

A wider door for crew and flight cases

The Snake Gate has the wider door, so crew can walk through with flight cases as well as feed cables. It creates a controlled entry point for crew within the line. At the door, two floor plates and side ramps form the base.

  • Two floor plates of 660 × 250 mm at the door
3D view: Snake Gate between straight sections
03 / 04 · Line

Part of the barrier line

Both openings belong to the Mojo stage barrier range and share the material specification of the Straight Section, the standard barrier of the line, and have a similar construction.

  • Aluminium profiles, stainless steel axles
  • Perforated door panels, like the Straight Section
3D view: Snake Runner between straight sections
04 / 04 · Applications

Camera platforms, mix positions, cable runs

The Snake Gate is ideal for camera platforms, mix positions and crew gateways. The Snake Runner is suitable where cables cross the barrier line and a narrow door is enough.

In numbers

Four numbers for two openings

The Snake Gate fills one place in the line, and a tested specimen took more than the required load.

Snake Gate

1.00m

Length in the line

The Snake Gate takes the place of one Straight Section in the line.

Door difference

0.30m

Wider door

The Snake Gate door is about 30 cm wider than the Snake Runner door.

Lloyd's, 2011

5.50kN/m

Tested load

Applied to a Snake Gate specimen of 990 × 1200 mm, against the required 5 kN/m.

TÜV Nederland

2013

Certificate year

Certificate 2013-A-168-C1 names the Snake Runner and the Snake Gate.

Technical data

Technical data by opening

FeatureSnake RunnerSnake Gate
Door widthapprox. 0.50 m0.76–0.85 m
Length in the line1.00 m1.00 m
Door openstowards the crowdtowards the crowd
Cablesup to 3.5 cm thickup to 3.5 cm thick
Door lockboltbolt
Fixed partfloor plate and rear tread; braces depending on the production seriesno continuous floor plate, no rear step
Connectionto the adjoining section (details by series)to the adjoining section (details by series)
Materialas Straight Sectionas Straight Section
Finishsilver, also with a black uprightsilver, also with a black upright
Height1.20 m1.20 m
Depthon requeston request
Weight31 kg30 kg
Tested load5,000 N/m (TÜV, 2013), tested specimens5.50 kN/m (Lloyd's, 2011) · 5,000 N/m (TÜV, 2013), tested specimens
CertificateTÜV 2013-A-168-C1 (tested specimens)Lloyd's 030611-SB01, sheet 4 · TÜV 2013-A-168-C1 (tested specimens)

Snake Runner and Snake Gate exist in several production series with different designs, so door widths and connection details vary slightly; the rental company confirms the exact width of the units supplied. Tested load and certificate apply only to the tested specimens. On request: value not yet published.

Certification

Independently tested

Lloyd's British Testing tested a Snake Gate specimen of 990 × 1200 mm in 2011 to BS EN 13200-3:2005, report 030611-SB01, sheet 4: 5.50 kN/m were applied, with no permanent set. TÜV Nederland certificate 2013-A-168-C1 names both openings. Each document applies only to the specimens tested.

All documents are on the certification page.

Lloyd's British Testing · 1
TÜV Nederland · 1
Lloyd's British Testing report 030611-SB01, sheet 4, Snake Gate, 2011
TÜV Nederland certificate 2013-A-168-C1 naming the Snake Runner and Snake Gate
Test report 01 / 02Snake GateLloyd's British Testing, report 030611-SB01, sheet 4, 3 June 2011
Certificate 02 / 02Certificate 2013-A-168-C1TÜV Nederland QA, TÜV NORD Group, 12 December 2013

FAQ

Questions about the Snake Runner & Snake Gate

Two contacts, depending on the question:

  • Openings for your layout, units in stock and hire: the rental company in your country
  • Data sheets and test documents: Mojo Barriers BV

A crowd barrier gate is a section of a crowd control barrier line with a hinged door, so crew and cables can cross at a set point while the line stays closed to the people in the crowd. In a Mojo Barrier line there are two of them: the narrow Snake Runner and the wider Snake Gate, each designed for its own use.

NeedOpening
cable runs onlySnake Runner
crew walking throughSnake Gate
rear step for security staff at the openingSnake Runner (fixed part)
larger cable runsCable Gate
  • where crew and cables need to cross the line
  • the door width of the units supplied, which differs between production series
  • silver or with a black upright, to match the rest of the line
  • the crowd safety plan and the restricted areas behind the line, set by the event organisers and the team managing crowds at the event
  • stock at the rental company for your event dates

Multi-cores and power cables up to 35 mm thick fit through the doors of both openings, so cables between stage, mix position and camera platforms can cross the line. For larger cable runs, the Cable Gate has a 110 mm opening below its door.

  • a bolt secures the door when it is closed
  • on the Snake Gate, the hinge sits on the side with the connecting pin

Yes. Both openings are hired out through the rental companies of the MOJO Holding Group, for concerts, festivals and other events, indoor and outdoor. Speak to the rental company in your country about the units and door widths in stock. For product questions, contact our team.

Double Mojo Barrier line in front of a large stage

Hire

Find the Snake Runner & Snake Gate near your event

Tell the rental company in your country where crew and cables need to cross the line. They plan the Snake Runner and Snake Gate with the Straight Sections around them.